The RCSS Aluminum Case 30x30x10mm Aluminum Fan is a great option to keep your ESC and motor temps at a minimum. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan's motor at high voltage RPM. Plus the aluminum frame work adds strength to the assembly, helping protect the fan blades better than plastic cases in the event of a crash. 6.0-8.4v operating voltage
IMPORTANT!!
NOTE: This fan MUST be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnetic interference. Magnetic interference (The slowing down of the fan's blades when too close to the motor & under power) will burn up your fan's motor. See below for proper installation steps
Pro tip:
Before mounting fan in car:
1. Plug in fan and turn on car and radio
2. Hand-place fan at least 5mm from motor
3. Position your ride on your car stand add throttle and make sure fan blades do not slow down due to being too close to the motor's magnetic field
4. If fan blades slow down, relocate fan position further away from motor until it stops slowing down under throttle due to motor magnetic field and mount accordingly
Available in: Red, Orange, Silver, Gold, Blue