The all-new HobbyStar 160A 1/10 Competition ESC has the same buttery smooth operation HobbyStar competition ESC's are known for, with all-new internal components and a 160A rating for the most powerful 1/10 race setups. Also features a new adjustable BEC with either 6V or 7.4V output at 5A (versus 3A on previous versions). Sporting an eye-popping list of available adjustments and the same footprint of a standard 120A ESC, the HobbyStar 160A ESC sets a new standard for 1/10 competition-level speed controls.
Features selectable 3rd channel adjustment. Via program settings, you can assign a knob or switch on your radio to adjust 1 of 14 available settings on the fly.
ESC comes with power and motor leads already soldered on, and an updated triple capacitor bank.
PENDING ROAR APPROVAL
Available Adjustments:
- Running Mode: Forward/brake, forward/Reverse/brake and forward/reverse
- Cutoff Voltage: Auto or by voltage
- ESC Overheat Protection Setting: By temperature
- Motor Rotation: Normal/reverse
- Race Mode and Stock Mode: Provide targeted base-profiles for both 4.5T-9.5T motors and 10.5T and above
- Dead Band: By percentage
- BEC Output: 6V/7.4V @5A
- Throttle IP limiter: To control initial power hit based on track conditions
- Throttle Rate: Controls overall throttle power for varying track conditions
- Drive Frequency: To fine-tune the throttle feeling from smooth to aggressive
- RPM Lock: Allows locking in a specific RPM for drifting applications
- Throttle Curve: Linear or custom
- Initial Brake: By percentage
- Drag Brake: By percentage
- Brake Force: By percentage
- I-Brake Response: Controls the initial brake power response to the motor for varying track conditions
- Brake Rate: Controls overall brake power for varying track conditions
- Brake Frequency: To fine-tune the brake feeling from smooth to aggressive
- Brake Curve: Linear or custom
- Boost Timing: By degrees
- Boost Trigger Level: 1-50
- Boost Trigger Rate: To set the speed of boost timing application
- Turbo Timing: By degrees
- Turbo Actuation: Method
- Turbo Delay: By time
- Turbo Start RPM: RPM
- Turbo On-Rate: 1-10
- Turbo Off-Rate: Instant-10
Programming: Must use the 160A & 220A LCD Program Card or Starlink USB link and PC application to program ESC.
Specifications:
- Continuous Current: 160A
- Burst Current: 1200A
- Resistance: 0.0003ohm
- Suitable Car: 1/10, 1/12
- Motor Type: Brushless sensored or sensorless 2-pole
- Motor Limit: 3.5T (2S), 7.5T (3S)
- Cell Count: 2-3S LiPo, 5-10S NiCd/NiMh
- BEC Output: 6V/7.4V @5A
- Dimensions (without fan): 36.4x38.1x31mm
- Weight: 50g (without fan/wires)
NOTE: This ESC is best suited for 1/10 2WD buggies, SCT's and 1/10 4WD buggies with 540 2-pole motors. NOT for use on 4WD SCT's or with 4-pole motors.